Knowing how to fix a car puncture during an emergency is crucial because it empowers you to quickly address a common issue that could otherwise leave you stranded. Additionally, it is an essential knowledge one must possess as it can come handy during emergencies.
So, the next time you have a flat tyre while on a highway and have a puncture kit handy, use this step-by-step guide to fix your tyre and get going.
Locate the puncture
Park your car on a stable surface and jack it up. After that, loosen the lug nuts and pull out the flat tyre. Carefully examine the tyre and look for objects that might’ve caused the puncture such as nails, small glass pieces, or screws. If you can’t find one, try inflating the tyre and apply soap water on it. This is the easiest way to spot a leak as it will make bubbles.
If it is a nail or screw, you can use a pair of pliers to remove it. Be careful not to damage the tyre any further.
Clean the puncture
Use a brush or a rag to clean the area around the puncture. This will help the repair material to adhere better.
So, the next time you have a flat tyre while on a highway and have a puncture kit handy, use this step-by-step guide to fix your tyre and get going.
Locate the puncture
Park your car on a stable surface and jack it up. After that, loosen the lug nuts and pull out the flat tyre. Carefully examine the tyre and look for objects that might’ve caused the puncture such as nails, small glass pieces, or screws. If you can’t find one, try inflating the tyre and apply soap water on it. This is the easiest way to spot a leak as it will make bubbles.
If it is a nail or screw, you can use a pair of pliers to remove it. Be careful not to damage the tyre any further.
Clean the puncture
Use a brush or a rag to clean the area around the puncture. This will help the repair material to adhere better.
TOI Auto car vlog: Is Tata Tiago EV still best value for money? | TOI Auto
Apply the repair material
There are two main types of repair materials: sealants and patches. Sealants are applied on the hole while patches are applied to the outside of the tyre. This step works with tubeless tyres. However, if you have a tube-type tyre, you’ll have to take the tube out and apply the patch on it directly.
Inflate the tyre
Use a tyre pump to inflate the tyre to the recommended pressure. And that’s that. Start moving your vehicle and check after 5-6 minutes if there are any leaks. If not, you’re good to go.
Denial of responsibility! Todays Chronic is an automatic aggregator of the all world’s media. In each content, the hyperlink to the primary source is specified. All trademarks belong to their rightful owners, all materials to their authors. If you are the owner of the content and do not want us to publish your materials, please contact us by email – todayschronic.com. The content will be deleted within 24 hours.